LTH 721




LTH is an in line polishing machine for rounded-profiled edges, flat or inclined edges or profiles combining flat and round shapes up to 10cm. The shaping of the rounded edge is carried out without using shaped diamond grinding wheels. Instead we use one or two cup-shaped diamond grinding wheels for all curving areas of the profiles and for all the different thickness of the materials used. The working mode is on a continuous process basis, this means that all the pieces are loaded one after the other on the machine, and then traverse through the series of mandrels until they are fully polished. This is a very high production machine that is capable of keeping up with even the largest commercial jobs at hand.

ADVANTAGES OF THE LTH 721:
Fully Automatic Horizontal Polisher
Production Speeds of 23 to 262 Lineal Feet per Hour
Processes pieces from 1-10 cm in thickness
7 polishing heads allows for perfect polish every time
Automatically adjusts to find center of pieces for easy setup
Patented since 1987
Easy operation allows for fabricators ease of use and cross-training
Gauging plate included to gauge thickness of material and cut drip stones
2 opposing mandrels set at 45 to help rough material into final shape
2- 4ft extension tables and front extension allows for processing of large pieces

SPECIFICATIONS OF THE LTH 721:
Number of Polishing Motors: 7
Number of Beveling Motors: 2
Number of Gauging Motors: 1
Total Water Consumption: 17 gallons/minute
Total Power Requirement: 230v/3phase/120amps
Total Dimension of Machine: 15.75ft x 6.5ft x 6.5ft
Total Weight of Machine: 11,000lbs
Extension Tables: Standard 3ft in length
Working Speed: 262 Lineal feet per Hour
Maximum Abrasive Size: 6" or 150mm
Minimum material size: 8 inches x 10 inches
Maximum material size: NO MAXIMUM



now in your cart
0 items